Filter
Top Products
TI Model 880 Printer Emulation 4-22
Tab Vertically
Control character: VT
Hexadecimal: 0B
If the printer is configured to perform a carriage return upon receiving
a VT control character, this command causes the printer to print the
current line, advance the paper to the next vertical tab stop, and
perform a carriage return. If the printer is not configured to perform
a carriage return upon receiving VT, the printer prints the current
line and advances the paper to the next vertical tab stop without
performing a carriage return.
Move to Line
n
Control character: DC2 n
Hexadecimal: 12 n
If the printer is configured to perform a carriage return upon receiving
a DC2 control character, this command causes the printer to position
the printhead at the left margin of the print line specified by n. If the
printer is not configured to perform a carriage return upon receiving
DC2, the printer advances the printhead vertically to the specified
print line without performing a carriage return. The variable n can be
any value in the range of 0 through the current form length setting or
through line 113, whichever is less.
Tab Vertically to Line
N
Escape sequence: ESC [ N d
Hexadecimal: 1B 5B N 64
The variable N can be any value in the range of 0 through 113
(hexadecimal 30 through 31 31 33) but must be between the current
print position and the bottom margin.
Tab Vertically
N
Lines
Escape sequence: ESC [ N e
Hexadecimal: 1B 5B N 65
The variable N can be any value in the range of 0 through 113
(hexadecimal 30 through 31 31 33).