Filter
Top Products
TI Model 855 Printer DP Emulation 6-9
Set Form Length to
n
Lines
Escape sequence: ESC C n
Hexadecimal: 1B 43 n
The variable n is valid for any value in range of 1 through 127 for 7-bit
character sets and 1 through 255 for 8-bit character sets.
Example. To set the form length to 60 lines, send the sequence
ESC C < (1B 43 3C).
Select Font
n
Escape sequence: ESC f n
Hexadecimal: 1B 66 n
The printer can have a maximum of 10 fonts, including two standard
fonts (Gothic and Courier) and up to eight optional fonts.
The variable n can be any value in the range of 0 through 9, where 0
designates Gothic, 1 designates Courier, 2 designates the first font in
option ROM 1, 3 designates the second font in option ROM 1, and
so on. The range of n for either option ROM depends on the number
of fonts contained in each ROM.
Examples. If option ROM 1 has two fonts and option ROM 2 has
three fonts, then the range of n is 2 through 3 for option ROM 1 and
4 through 7 for option ROM 2. If option ROM 1 has four fonts and
option ROM 2 has three fonts, then the range of n is 2 through 5 for
option ROM 1 and 6 through 8 for option ROM 2.
Horizontal Motion Commands
The following paragraphs describe the commands for horizontal
motion and tabulation functions in the Model 855 DP emulation mode.
Backspace
Control character. BS
Hexadecimal: 08
This command causes the printer to move the printhead one space to
the left.