Filter
Top Products
8
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure you use
the printer safely and effectively:
■ Turn off and unplug the printer before cleaning. Clean with a damp cloth only.
Do not spill liquid on the printer.
Always turn the printer off using the
P power button. Don’t
switch off the power strip, or unplug the printer until the
power light is off.
■
Do not place the printer on an unstable surface or near a radiator or heating vent
or direct sunlight.
■
Do not block or cover the openings in the printer’s case or insert objects through
the slots.
■ Use only the type of power source indicated on the printer’s label.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets
on the same circuit as photocopiers or air control systems that regularly switch on
and off.
■ Place the printer near a wall outlet where the plug can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée
facilement.
■ Do not let the power cord become damaged or frayed.
■ If you use an extension cord with the printer, make sure the total ampere rating of
the devices plugged into the extension cord does not exceed the cord’s ampere
rating. Also, make sure the total ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
■ Except as specifically explained in this manual, do not attempt to service the
printer yourself.
Intro.fm Page 8 Friday, February 19, 1999 4:00 PM