Filter
Top Products
49
Installing the Printer Driver on the
Workstations
This chapter describes how to install the printer driver. For Windows computers, you
need to change the port settings and for Macintosh computers, you need to select the
printer in the Chooser. Unless you are on a Windows NT Server network, you need
to install the printer driver on each workstation to enable it to print.
If you like, you can also install Status Monitor 2 on Windows 98, Windows 95, and
Windows NT 4.0 workstations to monitor the ink levels and keep track of other
information about your printer. Status Monitor 2 does create traffic, so you might
want to limit the number of users who monitor the printer. To install Status
Monitor 2, see the instructions on page 23.
If you are using only Windows 98 and/or Windows 95 on a
TCP/IP network, you must install EPSON Status Monitor 2 on
each workstation.
If your workstation does not have a CD-ROM drive, you can create diskettes from
the CD-ROM using another computer. See page 103 for instructions.
Installing the Printer Driver
The printer driver is on the printer software CD-ROM that came with your printer. If
you have a Windows NT Server 4.0 network, you don’t need to install the driver on
each workstation. See your Windows NT documentation to set up sharing.
clients.fm Page 49 Friday, February 19, 1999 4:01 PM