Filter
Top Products
Use
Ir]
or
m
or type the number of the desired option
to highlight a test and then press
[
to run it.
5.
When the test is completed, you see the Execute menu or the
test submenu again. You can select another test or exit the
menu.
To exit System diagnostics, press
m
to select Quit and
press [Enter. You return to the System Configuration
program Main Menu.
If an error prevents a test from running, you see a Runtime
Error information box. Follow the instructions on the screen to
solve the problem.
If an error occurs during a test, the test stops and an error
message appears. If you want to record the problem, you can
print the message on your printer. You see this prompt:
Do you want a printout of the error
message(s) ? (Y/N)
To continue without printing, press
m
and [Enter.
To print the message, press
[vl
and
IEnter
The program prints
the message. Then press
[
again.
For a complete list of the error messages the program may
display, see the table at the end of this appendix.
A-6
Rmnitzg
System Diagnostics