Filter
Top Products
If you are installing another type of Epson hard disk drive, the
jumpers may be in a different location, and there may be four
jumper positions instead of two.
Set the jumpers as necessary according to the the table below.
Hard
disk
drive
jumper settings
/Jumper
I
One hard disk
Two hard disk drives
positions
drive
Master (Primary)
Slave (secondary)
HSP
-
X = jumper installed
-
= no jumper installed
You do not install any jumpers on the slave drive.
To install or remove an IDE drive in the internal drive housing,
see page 6-13 for instructions.
To install or remove an IDE drive in an upper drive bay, see the
next section for instructions.
htalliug
atrd
Remving
Disk Drives
6-5