Filter
Top Products
Option 1, Format
If you select
Format
from the Hard
Disk Format Menu, you
see the following (for a disk
with no defective track table):
Format Hard Disk
<
Drive
n:
>
Scan hard disk to get defective track
information? (Y/N)
(If the disk already has a defective track table, you do not see
this because you do not need to scan for bad tracks.)
1.
Select Y to scan the disk or N to skip the scanning process.
If you select Y, the program scans the disk and displays these
messages during the process:
Scanning for flagged bad tracks...
Head
: nnn
Cylinder : nnnnn
You see the head and cylinder numbers decrease as the
program progresses. After scanning the disk, the program
displays the results, such as the following:
Scanning finished.
Count of tracks flagged bad
=
1
Count of tracks with other errors =
0
Count of good tracks
= 4884
2.
Next you see the following prompt:
Accept recommended skewed sectors in
format
: 1 ? (Y/N)
Formatting a Hard Disk B-5