Filter
Top Products
Using the Printer Software with Windows 111
4
4
4
4
4
4
4
4
4
4
4
4
❏ When you are using shared printer in a Windows Me or 98
environment, on the server, double-click the Network icon in
Control panel and make sure that the “File and printer sharing for
Microsoft Networks” component is installed, then on the server and
clients, make sure that the “IPX/SPX-compatible Protocol” or the
“TCP/IP Protocol” is installed.
❏ The print server and clients should be set on the same network
system, and they should be under the same network management
beforehand.
Setting up your printer as a shared printer
When the print server’s OS is Windows Me or 98 follow the steps
below to set the print server.
1. Click Start, point to Settings, then click Control Panel.
2. Double-click the Network icon.
3. Click File and Print Sharing on the Configuration menu.
4. Select the I want to be able to allow others to print to my
printer(s). check box, then click OK.
5. Click OK to apply the settings.
Note:
❏ When “Insert the Disk” appears, insert the Windows Me or 98
CD-ROM in the computer. Click OK, then follow the on-screen
instructions.
❏ When the prompt to restart the computer appears, restart the
computer, then continue with the settings.
6. Double-click the Printers icon on the control panel.