Filter
Top Products
Troubleshooting 269
11
11
11
11
11
11
11
11
11
11
11
11
The printer does not print normally via the parallel
interface (Windows 98 only)
The printer does not print normally via the USB
interface
The printer does not print normally via the
network interface
Cause What to do
The computer is connected to the
printer via the parallel interface and
the parallel port setting is set to the
ECP mode.
Make sure that the mode setting is
correct.
Cause What to do
For Windows users only
The Data Format setting in the
printer’s Properties is not set to
ASCII or TBCP.
The printer cannot print binary data when it
is connected to the computer via the USB
interface. Make sure that the Data Format
setting, which is accessed by clicking
Advanced on the PostScript sheet of the
printer’s Properties, is set to ASCII or TBCP.
If your computer is running Windows XP,
click the Device Settings tab in the printer’s
Properties, then click the Output Protocol
setting and select ASCII or TBCP.
For Macintosh users only
The Data Format setting in the
printer’s Properties is not set to
ASCII.
The printer cannot print binary data when it
is connected to the computer via the USB
interface. Make sure that the Data Format
setting, which is accessed by clicking Print
from the File menu, is set to ASCII.
Cause What to do