Filter
Top Products
186 Using the Control Panel
If you do not want to print this job in manual mode, press the
+ Cancel Job button.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the N Start/Stop button on the control panel to resume
printing. Or press the + Cancel Job button to cancel the print
job.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the Network utility. Refer to the Network
Guide for information.
Need Memory
The printer has insufficient memory to complete the current print
job. Cancel printing by deleting it from the print queue on your
computer, or by pressing the + Cancel Job button on the printer.
To clear this error message, select Clear Warning from the control
panel’s Reset Menu. See "How to access the control panel menus"
on page 149 for instructions.
To prevent this problem from happening again, add more
memory to your printer as described in "Memory Module" on
page 202.
NonGenuine Toner
The installed imaging cartridge is not a genuine Epson product.
Installing a genuine imaging cartridge is recommended. Using a
non-genuine imaging cartridge may affect print quality. Epson
shall not be liable for any damages or problems arising from the
use of consumable products not manufactured or approved by
Epson.