Filter
Top Products
Troubleshooting 251
11
11
11
11
11
11
11
11
11
11
11
11
Half-tone images print unevenly
Toner smudges
Cause What to do
Your paper may be moist or damp. Do not store paper in a humid or damp
environment. Be sure to use paper that is
newly unwrapped.
There may be no toner left in the
imaging cartridge.
If the message on the LCD panel or in
EPSON Status Monitor indicates that the
amount of toner left is low, see "Replacing
an imaging cartridge" on page 214.
You can also check the remaining toner
with the following symbols on the Basic
Settings tab in the printer driver.
Toner low: !
Toner end: ×
The gradation setting is too small
when printing graphics.
On the Basic Settings tab in the printer
driver, click the Advanced and select the
More Settings button. Then select the
Halftoning.
Cause What to do
Your paper may be moist or damp. Do not store your paper in a humid or
damp environment.
You may not be using the correct
type of paper for your printer.
EPSON special paper or smooth,
high-quality copier paper is
recommended for best results. See
"Available paper types" on page 276 for
information on choosing paper.
The paper path inside the printer
may be dusty.
Turn off the printer. Clean internal printer
components by printing three pages with
only one character per page.