Filter
Top Products
128 Using the PostScript Printer Driver
For Macintosh
Any Macintosh computer to which the printer is connected must
be running Mac OS 9 ver. 9.1 or later, or Mac OS X ver. 10.2.x or
later. See the following table for details.
Mac OS X
There are no restrictions for this system.
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a protocol other than AppleTalk
for the network connection, you need to set Binary to On in the
PS3 Menu on the control panel. If you use the printer with a local
connection, you cannot use binary data.
Mac OS 9
Note:
To use binary data, Epson recommends that you use AppleTalk for the
printer’s network connection. If you use a local connection or a protocol
other than AppleTalk for the network connection, you cannot use binary
data.
c
Caution:
❏ The Adobe PostScript 3 printer driver cannot be used on
computers running System 9.0.x or below.
❏ The Adobe PostScript 3 printer driver cannot be used on
Macintosh 68K computers.
Minimum Recommended
Computer Power PC
Hard Disk 3.1 MB free
(for driver installation)
4 MB free
(for driver installation)
Memory 4 MB 32 MB