Filter
Top Products
182 Using the Control Panel
The printer is canceling the current print job. This message
appears when the + Cancel Job button has been pressed and
released within 2 seconds.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate paper size is set and a printer
driver for EPSON EPL-N2550 is used.
Can’t Print Duplex
The printer has encountered problems during duplex printing.
Make sure you are using an appropriate type and size of paper
for the Duplex Unit. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the
N Start/Stop button will print the rest of the print job on only one
side of the paper. Press the + Cancel Job button to cancel the
print job.
Cart Near Expiry
The imaging cartridge is nearing the end of its functional life.
Replacing it with a new imaging cartridge is strongly
recommended. See "Imaging Cartridge" on page 213 for
instructions.
Check Duplex P-Size
The paper size loaded in the printer is not appropriate for the
optional Duplex Unit.
Load correct the paper size and press N Start/Stop button to
resume printing.
Check Paper Size