Filter
Top Products
212 Replacing Consumable Products
Chapter 9
Replacing Consumable Products
Replacement Messages
When you see the following messages on the LCD panel or the
window of EPSON Status Monitor, replace the appropriate
consumable products. You can continue to print for a short time
after a message appears, but EPSON recommends early
replacement to maintain print quality and extend the life of your
printer.
Note:
To clear these messages, select Clear All Warnings in Reset Menu.
When the Toner out setting in the Setup Menu on the control panel
is set to Stop, the following occurs.
If you continue to use the printer without replacing consumable
products and a consumable product reaches the end of its service
life, the printer stops printing and displays the following
messages on the LCD panel or the window of EPSON Status
Monitor.
Control panel message Description
Toner Low The amount of remaining toner in the imaging
cartridge is low.
Worn Fuser The fuser unit has reached the end of its
service life.
Control panel message Description
Replace Toner The imaging cartridge is empty.