Filter
Top Products
136 Using the PostScript Printer Driver
Using online help
If you want help on a particular item, click the “?” icon on the
top-right corner of the dialog box’s title bar, then click the name
of the setting that you want more information on. An explanation
of the setting and its options will be displayed.
Notice for Windows Me or 98 Users
The printer may not print normally if the computer is connected
to the printer via the parallel interface and the ECP mode is set. If
this is the case, disable bi-directional support in the printer driver.
To do so, display the printer’s Properties dialog box, click the
Details tab, then click Spool Settings. In the Spool Settings dialog
box that appears, Select Disable bi-directional support for this
printer, then click OK.
Using AppleTalk under Windows 2000
Use the following settings if your machine is running Windows
2000, and the printer is connected through an network interface
using the AppleTalk protocol:
❏ Use SelecType to set the Emulation Mode-Network item to
PS3. Using the default Auto setting will cause an extra,
unneeded page to be printed.
❏ On the Device Settings sheet of the printer’s Properties
dialog box, make sure that SEND CTRL-D Before Each Job
and SEND CTRL-D After Each Job are set to No.
❏ TBCP (Tagged binary communications protocol) cannot be
used as the Output Protocol setting.
❏ On the Job Settings sheet of the printer’s Properties dialog
box, make sure to clear the Job Management On check box.