Filter
Top Products
168 Using the Control Panel
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If Maximum is selected, more memory is
allocated for receiving data. If set to Minimum is selected, more
memory is allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in "Reset Menu" on page 163.
❏ Resetting the printer erases all print jobs. Make sure the Ready light
is not flashing when you reset the printer.
Network Menu
See the Network Guide for each setting.
AUX Menu
See the Network Guide for each setting.
LJ4 Menu
These settings control the fonts and symbol sets when in the LJ4
mode.