Filter
Top Products
4 • Using the ELP Link III Software
92
Using the Software
The ELP Link III software can be used to:
●
Change the COM port assignment
●
Customize the remote control Effects buttons
●
Control standard and special projector features
Note:
If you ever select
Unconnected and Execute
from the Option
menu, always uncheck the setting before exiting ELP Link III so the
program starts correctly the next time you use it.
Changing the COM Port Assignment
If you did not select the correct COM (communication) port when
setting up the software, or if you have changed the COM port to
which the projector is connected, you can change the COM port
setting from the ELP Link III software.
1. Select Com Port from the Option menu.
2. Choose a COM port from the list that appears.
Customizing the Remote Control Effects Buttons
You can reconfigure the remote control Effects buttons to perform
special operations, such as drawing shapes on the projected image
or changing the cursor shape. You customize the Effects buttons
from the ELP Link III main dialog box.
5500.book Page 92 Wednesday, August 4, 1999 4:41 PM