Filter
Top Products
Connecting to a Computer
23
Note:
You need the optional ELP Link III set to connect the
projector to a computer with a serial mouse. See Chapter 4
for more information.
b. Connect the other end of the PS/2 mouse cable to the
projector’s Mouse/Com port.
3. Connect the audio cable if needed.
a. Connect one end of the audio cable to the Audio In jack on
the projector.
b. Connect the other end of the audio cable to the Audio Out
port on a sound card in the computer.
4. If you are using the optional ELP Link III software, see Chapter
4 for instructions for connecting the Link cables.
audio cable
Audio In jack
5500.book Page 23 Wednesday, August 4, 1999 4:41 PM