Filter
Top Products
Video Menu (Image Source = Computer)
63
Video Menu (Image Source = Computer)
The Video menu lets you make adjustments to the projected image.
The following options are available when the image source is
Computer.
Note:
The computer must be connected and operating, and the
image source on the projector must be set to Computer for you to
access these
menu options.
Menu item Description
Position Select this item by pressing the Enter button (control panel) or the
multi-purpose button (remote) to enter screen position adjustment mode.
Then use the pointer button (remote) or up, down, left, and right buttons
(control panel) to move the screen position in the corresponding direction.
When you finish making adjustments, press the Menu button on the control
panel or the remote to return to the Video menu.
Tracking Matches the projector’s internal clock to various computer graphic signals.
Adjust this setting to remove vertical lines from the image.
Sync Synchronizes with the tracking signal sent from the computer. Adjust this
setting to correct fuzziness or screen flicker.
Brightness Lightens or darkens the overall image. Increase brightness to lighten an
image, or decrease it to darken the image.
Contrast Adjusts the difference between light and dark areas. Increase the contrast to
make light areas lighter and dark areas darker. Decrease it to minimize the
difference between light and dark areas.
5500.book Page 63 Wednesday, August 4, 1999 4:41 PM