Filter
Top Products
5 • Maintenance
112
4. The air filter is attached to the inside of the filter cover. It is
recommended that you use a small vacuum cleaner designed for
computers and other office equipment to clean the filter. If you
don’t have one, use a dry, lint-free cloth.
If the dirt is difficult to remove or if the filter is torn, replace the
air filter.
Note:
An air filter comes with each replacement lamp. Contact
your dealer or call EPSON Accessories at (800) 873-7766 in
the U.S. to obtain a new one. Request part number ELPLP06. In
Canada, call (800) 873-7766 for dealer referral.
5. Place the air filter back inside the filter cover.
6. Plug the power cord back into the electrical outlet.
Replacing the Lamp
The projector lamp typically lasts for about 2000 hours of use. It is
time to replace the lamp when:
●
The projected image gets darker or starts to deteriorate.
●
The projection lamp light is red or is flashing orange and red
alternately.
●
The message
LAMP REPLACE
appears on the screen when
the projector lamp comes on.
To order a replacement lamp, contact your dealer or call EPSON
Accessories at (800) 873-7766 in the U.S. and ask for part number
ELPLP06. In Canada, call (800) 873-7766 for dealer referral.
5500.book Page 112 Wednesday, August 4, 1999 4:41 PM