Epson 5500C Projector User Manual


 
2 • Using the Projector
50
4. If the projector is not on a level surface, level the projector by
turning one of its rear feet to adjust its height.
Resize Button
The Resize button lets you select the projection method for certain
types of image signals input from a computer.
PowerLite 7500C:
With images up to XGA size (1024
×
768), you can choose from two
projection methods. You can either display the image in the center
of the projection area or display the image full size. You can also
choose from two projection methods with images greater than XGA
size: either project a portion of the image or project the entire image
in a compressed format. The projector automatically reduces the
image size to the projector’s maximum resolution. The Resize
button cannot be used with images at XGA resolution.
PowerLite 5500C:
With images up to SVGA (800
×
600 pixels), you can either project
a portion of the image or project the entire image in a compressed
format. The projector automatically reduces the image size to the
projector’s maximum resolution. The Resize button cannot be used
with SVGA.
There is a Resize button on both the control panel and the remote
control. Press the Resize button to cycle between the choices
described above.
5500.book Page 50 Wednesday, August 4, 1999 4:41 PM