Filter
Top Products
Video Menu (Image Source = Video)
65
Video Menu (Image Source = Video)
The Video menu lets you make adjustments to the projected image.
The following options are available when the image source is
Video.
Note:
The projector’s image source must be set to Video, and the
video source (such as a VCR or camcorder) must be connected and
operating for you to access these menu options (for example, the
projector must actually be projecting an image from a video tape, if
you’re using a VCR).
Menu item Description
Brightness Lightens or darkens the overall image. Increase brightness to lighten an
image, or decrease it to darken the image.
Contrast Adjusts the difference between light and dark areas. Increase the contrast to
make light areas lighter and dark areas darker. Decrease it to minimize the
difference between light and dark areas.
Sharpness Adjusts the sharpness of the screen image.
Color Adjusts color density. Increase the setting for darker and more opaque colors.
Decrease it for lighter and less opaque colors.
Tint
(NTSC only)
Adjusts the red-green color balance of the screen. Increase tint to add more
green, or decrease it to add more red. This setting only works with NTSC
video signals.
5500.book Page 65 Wednesday, August 4, 1999 4:41 PM