Filter
Top Products
Cleaning the Air Filter
111
Cleaning the Air Filter
Clean the air filter at the bottom of the projector after every 100
hours of use. If it is not cleaned periodically, it can become clogged
with dust, preventing proper ventilation. This can cause overheating
and damage the projector. To clean the air filter, follow these steps:
1. Turn off the projector and unplug the power cord from the
electrical outlet.
2. Place the projector on its side with the handle at the top so that
the filter is easily accessible.
Note:
Placing the projector in this position keeps dust from
getting inside the projector housing.
3. Lift up the tab securing the air filter and remove the filter.
1
2
air filter tab
5500.book Page 111 Wednesday, August 4, 1999 4:41 PM