Filter
Top Products
1 • Installation
30
a. Disconnect your Macintosh’s mouse cable. Connect the
small end of the projector’s Mac mouse cable to the Mouse
port on your Macintosh.
b. Connect the other end of the Mac mouse cable to the
projector’s Mouse/Com port.
3. Connect the audio cable if needed.
a. Connect one end of the audio cable to the Audio In jack on
the projector.
b. Connect the other end of the audio cable to the Audio Out
port on your computer.
4. If you are using the optional ELP Link III software, see Chapter
4 for instructions for connecting the Link cables.
audio cable
Audio In jack
5500.book Page 30 Wednesday, August 4, 1999 4:41 PM