Filter
Top Products
Attaching the Hand Strap
15
●
To connect the projector to an external sound system, you need
an RCA-to-3.5 mm stereo audio cable. You can obtain one from
your computer dealer.
●
To use the remote control when the projector is not in
line-of-sight of the remote, you need an optional infrared
repeater. For more information, call
(800) 843-5465
or
visit this
web address:
www.xantech.com
.
●
To connect a serial mouse cable to your computer, you may
require a special connector, cable, or other components. You
can obtain these items from your computer dealer.
●
To protect your projector, you can connect a Kensington
MicroSaver
®
anti-theft device in the hole on the right side of the
projector. Contact your local computer dealer.
Attaching the Hand Strap
1. Place the projector on its right side.
✦
Caution:
Do not hold or lift the projector by the lens. This can
damage the lens.
5500.book Page 15 Wednesday, August 4, 1999 4:41 PM