Filter
Top Products
1 • Installation
14
Depending on the configuration of your equipment, you may not
need all these components.
Save all packaging in case you need to ship the projector in the
future. Always transport the projector in its original packaging (or
the equivalent) or use a carrying case if you are carrying the
projector by hand. (See “Transporting the Projector” on page 115
for instructions.)
Additional Components
Depending on how you plan to use the projector, you may need
these additional components:
●
For complete control of the projector from your computer or to
program enhanced special effects on the remote control, you
need the optional ELP Link III set. You can purchase the set
from your dealer or by calling EPSON Accessories at
(800)
873-7766
(U.S. sales only).
●
To receive an S-Video signal, you will need an S-Video cable.
(One is usually provided with your video device.) A separate
cable is required for each video source.
●
To connect the projector to a Macintosh PowerBook, you need a
video-out cable and an adapter. (One is provided by—or can be
purchased from—Apple for all new PowerBooks that have
video-out capability.) If your PowerBook does not include one,
see your Macintosh dealer.
5500.book Page 14 Wednesday, August 4, 1999 4:41 PM