Filter
Top Products
2 • Using the Projector
42
If computer or video equipment is attached, the computer or video
signal is projected. Allow about 30 seconds for full illumination.
✦
Warning:
Never look into the lens when the lamp is on. This can
damage your eyes. It is especially important that children not look
into the lens.
When you want to stop projecting images, press the Power button
again. The fan remains on and the power light flashes orange for
about two minutes as the projector cools down.
When the projector has cooled down, the power light stops flashing
and remains orange.
To turn off the projector completely, turn off the main power switch
at the rear of the projector after the power light becomes orange.
Note:
If you press the
Power
button to turn the projector back on
while the power light is orange, there may be a delay before a
projected image appears.
power light
temperature light
projection lamp light
5500.book Page 42 Wednesday, August 4, 1999 4:41 PM