Filter
Top Products
Controlling the Projector
53
Note:
The projector may not respond to remote control commands
in these conditions: ambient light is too bright; a certain type of
fluorescent light is present; a strong light source (such as direct
sunlight) shines into the infrared receiver; or other equipment
emitting infrared energy is present (such as a radiant room heater).
Correct these conditions to use the remote control or control the
projector from a computer.
This table summarizes the functions on the remote control.
Button Function
Source Switches input source from computer to video or vice versa.
Menu Displays or hides the menu.
Effects buttons Use to display special effects that have been assigned in the Effect menu
or with the optional ELP Link III software.
Pointer button Use to navigate the menus or use the remote as a mouse pointer when the
projector is connected to the computer with the included mouse cable or
the optional ELP Link III set cables.
Top
multi-purpose button
Acts as a right mouse click, registers a menu selection, and selects other
custom functions.
Bottom
multi-purpose button
Acts as a left mouse click, registers a menu selection, and selects other
custom functions.
AV/Mute Turns off/on the audio/video output of the projector, clears all special
effects, and displays a black, blue, or user logo screen.
Resize Resizes the image on the screen to match the resolution of your
computer display. See page 49 for details.
5500.book Page 53 Wednesday, August 4, 1999 4:41 PM