Filter
Top Products
4 • Using the ELP Link III Software
94
The table below describes these functions and how to use them.
Note:
Once you have pressed an Effects button, you can size and
position the effect using either your mouse or your remote control
(if you’ve set up the remote control to function as a mouse).
Function Description and usage
Line Draws a straight line on the screen.
Press the Effects button assigned to this effect. Then press the bottom multi-purpose
button once to define the line start position. Move the cursor using the remote pointer
button. Then press the bottom multi-purpose button again to define the line end
position. To draw another line, move the cursor away from the line you just created
and press the bottom multi-purpose button again to define the new line start position.
Ellipse Draws an ellipse (oval) on the screen.
Press the Effects button assigned to this effect. Then press the bottom multi-purpose
button once to define the start position of the ellipse. Move the cursor using the
remote pointer button. Then press the bottom multi-purpose button again to define the
end position of the ellipse. To draw another ellipse, move the cursor away from the
one you just created and press the bottom multi-purpose button again to define the
start position for the new ellipse.
Box Draws a box on the screen.
Press the Effects button assigned to this effect. Then press the bottom multi-purpose
button once to define the position of one corner of the box. Move the cursor using the
remote pointer button. Then press the bottom multi-purpose button again to define the
position of the opposite corner of the box. To draw another box, move the cursor away
from the one you just created and press the bottom multi-purpose button again to
define the start position for the new box.
5500.book Page 94 Wednesday, August 4, 1999 4:41 PM