Filter
Top Products
4 • Using the ELP Link III Software
78
Connecting to a PC Desktop Computer
The main cable included in your ELP Link III set connects the PS/2
mouse cable (needed to use the remote control as a mouse) and
9-pin serial cable (needed to use the ELP Link III software and the
Effects buttons on the remote control) from your computer to the
projector.
1. If you connected the PS/2 mouse cable included with the
projector as described on page 22, disconnect it from the
computer and the projector.
2. Connect the round end of the main cable to the projector’s
Mouse/Com port.
PS/2 mouse cable
main cable
9-pin serial cable
Mouse/Com port
5500.book Page 78 Wednesday, August 4, 1999 4:41 PM