Filter
Top Products
4 • Using ELP Link III
88
You should already have connected the power cord, the projector’s
video cable, and any other cables required for the equipment you are
using, as described in Chapter 1.
Note:
To keep the illustrations in this section simple, the pictures
show only how to connect the ELP Link III cables; they don’t show
the power, video, or other cables you already connected.
Connecting to a PC Desktop or Laptop
The following instructions explain how to connect the ELP Link III
cables to your PC desktop or laptop computer. The steps are
identical for both types of computers except where noted otherwise.
You must connect both the main cable and the 9-pin serial cable that
came with the ELP Link III kit to use the ELP Link III software and
the Effects buttons on the remote control. If you want to use your
remote control as a computer mouse, you need to connect either the
PS/2 or the serial mouse cable that came with the kit.
Before you start, make sure the projector and computer are turned
off.