4 • Using ELP Link III
122
Setting tab
The Setting tab enables you to adjust basic projector settings.
Option Description
Blank
(AV/MUTE)
Specifies whether a black screen, a blue screen, or a user-defined logo
displays when the screen is blanked.
Install Specifies how the projector is installed (if you are not using front
projection):
Rear Proj Use this setting when projecting to the back of a screen so
the image is flipped left to right.
Ceiling Use this setting when the projector is installed on the ceiling
so the image is flipped top to bottom.
Prompt Temporarily displays a prompt on the projector screen identifying
which source (computer or video) is providing the image.
Color Temp
Adjusts the whiteness of the screen. Positive color temperature values
provide a cold white; negative values provide a warmer white. Press the
right arrow button on the control panel or press right on the remote’s
pointer button to increase the color temperature value; press the control
panel’s left arrow button or left on the remote’s pointer button to
decrease the color temperature value.
Mode Specifies the input image signal mode: AUTO, NTSC, NTSC 4.43,
PAL, PAL N, PAL M, PAL 60 or SECAM.
Pattern
Display
Enables or disables display of the test pattern currently selected.
Reset Resets all settings to their default values.