Filter
Top Products
Turning the Equipment On and Off
49
Turning the Equipment On and Off
It’s best to turn on the projector and its attached equipment in the
following order:
1. Video source (such as a VCR), if your video source is not your
computer
2. Audio source (if different from the computer or video source)
3. External amplified speaker or PA system (if you’ve connected
one)
4. Projector (see instructions below)
5. Computer
When you’re ready to turn off the equipment, do so in the reverse
order.
Turning the Projector On and Off
Before you turn on the projector, make sure it is plugged in and
connected to your video source.
1. Remove the projector lens cap.
2. Turn on the main power switch located at the rear of the
projector and wait until the power light turns orange.