Filter
Top Products
With Windows NT 4.0
To use your printer over a network with Windows NT 4.0, you
must set up the computer to which the printer is connected (the
print server) and also set up the other computers on the
network which will use the computer (the client computers).
To set up the print server so that the printer is shared across the
network, see your Windows NT 4.0 documentation.
The instructions below explain how to set up your Windows
NT 4.0 as a client computer to use your printer, after you have
set up the print server.
1. Make sure your printer software is installed (see page 2-13 if
it is not installed).
2. Click
Start
, point to
Settings
, and click
Printers
.
3. Double-click the
Add Printer
icon.
4. Click the
Network printer
radio button. Click
Next
.
5. Select the print queue where print jobs destined for this
printer will be sent, or select the network path to the printer.
Note:
Be sure to confirm all network settings with the network
administrator.
fig1
L
Comoro-W
Rev.C
A5 size Chapter 2
12-12-97 DR, pass 0
2-22
Getting Started