Filter
Top Products
EPSON Imaging Technology Center
Revision: 1 (Date: 6/20/00)
Page: 13
2.4 Characteristic Information for Each Paper Type
Mechanism sequence setting, cutter On/Off information, drying time, and paper thickness are following as characteristic information (TBD)
Table 4: Characteristic Information for Each Paper Type – ROLL Paper
1.1.1. Set mechanism sequence 1.1.3. Set auto cut 1.1.5. Set drying time 1.1.9. Set paper thickness
Paper type
SN 03H 00H 00H 01H <m2> AC 02H 00H 00h <m1>
DR 04H 00H 00H 00H <m2> <m3>
PH 02H 00H 00H <m1>
Plain Paper
00H (Default)
00H(Cutter Off) or
01H(Cutter On or
02H(Print vertical line)
0000H (No drying time) 01H (0.1mm)
Matte Paper
00H (Default)
00H(Cutter Off) or
01H(Cutter On or
02H(Print vertical line)
0000H (No drying time) 02H (0.2mm)
Photo Quality Glossy Paper
00H (Default)
00H(Cutter Off) or
01H(Cutter On or
02H(Print vertical line)
0000H (No drying time) 02H (0.2mm)
Photo Quality Semi Glossy Paper
00H (Default)
00H(Cutter Off) or
01H(Cutter On or
02H(Print vertical line)
0000H (No drying time) 02H (0.2mm)
Glossy Film
00H (Default)
00H(Cutter Off) or
01H(Cutter On or
02H(Print vertical line)
0000H (No drying time) 01H (0.1mm)
Table 5: Characteristic Information for Each Paper Type – Cut sheet
1.1.1. Set mechanism sequence 1.1.3. Set auto cut 1.1.5. Set drying time 1.1.9. Set paper thickness
Paper type
SN 03H 00H 00H 02H <m2> AC 02H 00H 00h <m1>
DR 04H 00H 00H 00H <m2> <m3>
PH 02H 00H 00H <m1>
Plain Paper
00H (Default)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 01H (0.1mm)
Matte Paper
00H (Default)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 02H (0.2mm)
Photo Quality Glossy Paper
00H (Default)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 02H (0.2mm)
Photo Quality Semi Glossy Paper
00H (Default)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 02H (0.2mm)
Photo Quality Glossy Film
00H (Default)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 01H (0.1mm)
Photo Quality Ink Jet Paper
01H (big PG)
00H(Cutter Off)
*n/a for U
0000H (No drying time) 01H (0.1mm)