Filter
Top Products
EPSON Imaging Technology Center Page: 30
Revision: 1 (Date: 6/20/00)
- Commands related in the direction of applying an effect (Setting)
The set page length is changed by the ESC (C commands.
- Commands related in the direction of receiving an affect (Setting)
The top margin and the bottom margin are set by the ESC ( C command.
The page length and the bottom margin position are returned to their initial
states by the ESC @ and the ESC (G commands.
- Commands related in the direction of applying an effect (Operation)
New page processing by the FF command is affected (the amount of
movement is changed).
New lines generated by the LF command that goes outside of the printable
area is affected.
Processing by the ESC (v command is affected.
Processing by the ESC (V command is affected.
- Commands related in the direction of receiving an effect (Operation)
The page management units are set by the ESC (U command.