Filter
Top Products
EPSON Imaging Technology Center Page: 51
Revision: 1 (Date: 6/20/00)
6.26 Load Default Value “LD 00H 00H”
Format:
LD 00H 00H
Function:
- The following procedures are executed:
- The power on default environment memorized in NVRAM is loaded to default
environment.
- NVRAM indicates EEPROM, DIP-SW, and ROM. The power on default
environment is read from the appointed NVRAM with each setting item, and
the default environment is loaded.
- However, settings by following commands are not changed by this command.
(not loading)
- SM command (set the status transmitting mode)
- Baud rate setting value for the MAC serial by the BR command (set baud rate)
is not initialized. (The built-in EIA-232D serial interface intended to be
initialized.)
- This command is only valid in remote mode.