Filter
Top Products
EPSON Imaging Technology Center Page: 24
Revision: 1 (Date: 6/20/00)
6.3 Set Unit “ESC (U nL nH p v h mL mH”
Format:
ASCII ESC ( U nL nH p v h mL mH
Hex 1B 28 55 nL nH p v h mL mH
Decimal 27 40 85 nL nH p v h mL mH
Range of Definition:
nL=05H, nH=00H
p=01H, 02H, 04H, 08H
v=01H, 02H, 04H, 08H
h=01H, 02H, 04H, 08H
mL=A0H, mH=05H
Function:
- Set the following standard units in units of P/(mH*256+mL) inch.
Page units ESC (c, ESC (C, ESC (S, etc.
- Set the following standard units in units of V/(mH*256+mL) inch.
Vertical position units ESC (v, ESC (V, etc.
- Set the following standard units in units of H/(mH*256+mL) inch
Horizontal position units ESC ($, ESC (/, ESC $, ESC \, etc.
- mL, mH are elective, but 1440 dpi is recommended.
- This command is effective only at the time of the graphics mode.
Initial State:
- Page management units: 1/360 inch
- Relative horizontal position setting units: 1/180 inch units
- Absolute horizontal position setting units: 1/60 inch units
- Relative vertical position setting units: 1/360 inch units
- Absolute vertical position setting units: 1/360 inch units
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
None
Commands related in the direction of applying an effect (Operation)
The units for the relative horizontal position setting by the ESC\ command is set.
The units for the absolute horizontal position setting by the ESC $ command is set.
The units for the relative horizontal position setting by the ESC (/ command is set.
The units for the absolute horizontal position setting by the ESC ($ command is
set.
The units for the relative vertical position setting by the ESC (v command is set.
The units for the relative vertical position setting by the ESC (V command is set.