Filter
Top Products
EPSON Imaging Technology Center Page: 38
Revision: 1 (Date: 6/20/00)
6.14 Select Raster Graphics Data “ ESC i r c b nL nH mL mH d1…dk “
Format:
ASCII ESC i r c b nL nH mL mH d1..dk
HEX 1B 69 r c b nL nH mL mH d1..dk
Decimal 27 105 r c b nL nH mL mH d1..dk
Range of Definition:
r = 00H, 01H, 02H, 04H, 11H, 12H
c = 00H, 01H
b = 01H, 02H
0 <= ( nHx256 + nL ) <= 7FFFH
0 <= ( mHx256 + mL ) <= 7FFFH
Function:
- Select a color for the raster according to the “r” value.
r=00H : Black
r=01H : Magenta
r=02H : Cyan
r=04H : Yellow
r=11H : Light Magenta
r=12H : Light Cyan
- Select the raster printing mode according to following parameters;
c=00H : Full graphic mode (non-compression mode)
c=01H : Run-length encoding compression mode
- If r is out of above values, the color selected before input of this command is
set.
- If c is outside of the above values, the printing mode will be set before input of
this command.
- The number of bit per pixel is set according to b value.
- The support value of b is 01H (Stylus Pro 7000).
- If b is out of supporting range, this command is terminated when b is
processed.
- Actual image pattern of raster format set by following parameters is created.
nLnH : The number of horizontal direction bytes nHx256+nL(bytes)
nH = INT((( (the number of horizontal direction dots) x (the number of bits
per pixel) +7) /8) /256)
nL = MOD((( (the number of horizontal direction dots) x (the number
bits per pixel) +7) /8) /256)
mLmH : The number of vertical direction dots mHx256+mL(dots)
k : The number of data = (mHx256+mL)x(nHx256+nL)
d : Data
- The printing position in the X direction is set to a position spaced in the
positive direction from current X direction printing position by (nHx256+nL) x
(horizontal direction resolution) inches.