Filter
Top Products
EPSON Imaging Technology Center Page: 48
Revision: 1 (Date: 6/20/00)
6.23 Set Vertical Print Page Line Mode “EX” 06H 00H 00H 00H 00H 00H 14H m1
Format:
“EX” 06H 00H 00H 00H 00H 00H 14H m1
Parameters:
Parameter m1 is one byte binary code, and indicates the state as follows:
Set Vertical Print Page Line Mode m1
Off 00H
On 01H
Reserved 02H - FFH
Function:
- The default environment vertical print page line mode is set.
- If the paper width is set previously, and the actual paper width is longer than
setting, it prints vertical lines at a width of 1 dot on the horizontal position
within setting paper width from the top margin position to the bottom position.
- If the paper width is not set yet, it doesn’t print.
- If parameter m1 is out of range, this command is ignored and the existing
setting is maintained.
- This command is only valid in remote mode.