Filter
Top Products
Introduction
2
System Requirements
To use your printer and its driver, your system should have:
◗ An IBM
®
compatible PC with at least a 386/25 MHz or
faster processor
◗ Windows
®
3.1x, Windows for Workgroups 3.11,
Windows 95, or Windows NT
®
4.0
◗ At least 16MB of RAM (more for Windows 95)
◗ At least 20MB of free hard disk space for storing images
(50MB or more is recommended)
◗ VGA, Super VGA, or better display adapter and monitor
◗ Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
◗ A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
®
compatible connector for the printer.
To use the
EPSON
A
nswers online guide (not available for
Windows NT), you need at least a 486/33 processor. You also
should have at least 20MB of free hard disk space for full
program installation or at least 8MB of free hard disk space to
run
EPSON Answers from the CD.
For system requirements for the
EPSON Perfect Picture
™
Software Suite, see your Setup Guide.
hw_int.fm5 Page 2 Tuesday, July 29, 1997 2:14 PM