Filter
Top Products
Maintenance and Transportation
4-5
6. Remove the new ink cartridge from its packaging. Then
remove only the disposable yellow portion of the tape seal
as shown here.
7. Lower the ink cartridge into its holder with the label facing
up and the arrow pointing to the back of the printer. The
color cartridge goes on the right and the black cartridge
goes on the left.
8. Press down the ink cartridge clamp until it locks in place.
Caution:
You must completely
remove the yellow
portion of the tape seal
from the top of the
cartridge; leaving the
tape on will permanently
damage it. Do not
remove the clear seal
from the bottom of the
cartridge; ink will out.
black cartridge
color cartridge
Caution:
Don’t open the clamp or
remove a cartridge
except to replace it with
a new one. Once you
remove a cartridge, you
can’t reuse it, even if it
contains ink.
hw_ch4.fm5 Page 5 Friday, July 25, 1997 10:00 AM