Filter
Top Products
Maintenance and Transportation
4-6
9. Press the R cleaning (or E load/eject) button to begin
charging. (Even if you don’t press a button, ink charging
begins 60 seconds after you close the clamp.)
10. The Ppower light continues to flash while the ink charges.
When charging is finished, the Ppower light stops flashing
and the print heads move to the far right position. Close
the printer cover and resume printing.
Aligning the Print Heads
If your printouts contain misaligned vertical lines, you may
need to align the print heads.
1. Make sure the printer is turned on and paper is loaded.
If you are printing, wait until your printer has stopped
before continuing with step 2.
2. Access the printer driver as described in Chapter 1.
3. Click the
Utility tab.
4. Click the
Print Head Alignment icon.
5. Follow the instructions on the screen to print a test page
and select the correct alignment.
Caution:
Never turn off the printer
while the Ppower light
is flashing.
If however, the Ppower
light is still flashing after
10 minutes and the
printer is not moving or
making noise, you may
turn off the printer.
Caution:
Load paper that’s at least
8.3 inches (210 mm)
wide so ink doesn’t spray
onto the platen.
Do not use the print head
alignment utility with
printers on a network.
hw_ch4.fm5 Page 6 Friday, July 25, 1997 10:00 AM