Filter
Top Products
Basic Printing
1-13
The Status Monitor displays these icons:
If you need to run Spool Manager while you’re printing, select
the icon (Windows 3.1) or button (Windows 95) near the
bottom of your screen. You can also run Spool Manager from
the
EPSON program group or folder when you’re not sending a
print job. (See the printer driver online help utility, as described
in the next section, for details on using Spool Manager.)
Network Printing on a PC
You can use your printer on a network under Windows NT,
Windows 95, or other network operating systems. First you
need to set up your printer using either the network’s printer
setup functions or your printer software’s built-in network
support.
For instructions on using the printer software’s network
support, see “ Using the Printer Software’s Built-in Network
Support.”
Checking the printer status.
A printing error has occurred and your printer
cannot print.
The printer is ready to print.
The printer is currently printing.
The ink level is low or empty; check the Ink Out
light on the control panel and replace the
cartridge.
Note:
In Windows 3.1, you
may not see the Spool
Manager icon at the
bottom of your screen if
the Program Manager
window or an application
window is maximized.
Reduce the window size
to reveal the icon.
hw_ch1.fm5 Page 13 Thursday, August 7, 1997 4:33 PM