Filter
Top Products
Printing on Special Media
2-6
EPSON Photo Quality Glossy Paper, Glossy
Film, and Transparencies
Before loading transparencies, reposition the paper support as
shown on page 2-4. For media or transparencies, put a support
sheet (packed with the media) or a plain paper sheet beneath the
stack.
You can load up to 20 sheets of glossy paper, up to 30 sheets of
glossy film, or up to 10 transparencies. If you load multiple
sheets of glossy film, the minimum top margin you can use is
1.2 inches (30 mm). For best results, or to print with a smaller
top margin, load and print glossy film one sheet at a time.
Remove each sheet from the output tray immediately after it is
printed and make sure each sheet is dry before stacking it.
EPSON Photo Quality Self Adhesive Sheets
and Iron-On Transfer Paper
You should load these media one sheet at a time. Make sure
your adhesive sheets are fully adhered to their backing sheet
before you load it.
When printing on transfer paper, be sure to invert the image by
selecting a
Flip Horizontal option in your software or the
printer driver. Also, select
Ink Jet Transparencies as your
media type. (See Chapter 1 for details.) Follow the instructions
in the paper package to iron the image onto a surface.
EPSON Photo Quality Index Cards
You can load up to 30 index cards with a support sheet (packed
with the cards) or a sheet of plain paper beneath the stack. If ink
smears on the cards, set the adjust lever to the + position as
shown on page 2-9.
Caution:
Don’t use the cleaning
sheets that may be
included with your
special media; they may
damage the printer.
hw_ch2.fm5 Page 6 Thursday, August 7, 1997 4:36 PM