Filter
Top Products
Basic Operations 122
Feed Adjustment
1. Press the button during printing.
The current adjustment value is displayed.
2. Use the d/u buttons to change the current value.
If the feed amount is too small, black bands (dark stripes) will appear; adjust the feed
amount upward.
If, in contrast, the feed amount is too large, white bands (pale stripes) will appear; adjust
the feed amount downward.
3. Check the printing result. If you are not satisfied with the results, use the d/u buttons to
change the value.
This updates the setting value of Feed Adjustment in the currently selected media
settings.
4. Press the Z button to exit the menu.
Note:
The time needed for the heaters to reach the specified temperatures varies with the
ambient temperature.