Epson S70675 Printer User Manual


 
Problem Solver 219
The printer has an error.
The Printer Sounds Like It Is Printing, But Nothing Prints
The print head moves, but nothing prints.
Test pattern does not print correctly
o Confirm if errors have occurred in the printer by checking the lights and messages on the printer's control
panel.
See “Control Panel” on page 20 and “When a Message Is Displayed” on page 215.
o Confirm the printer operation.
Print a test pattern. Test patterns can be printed without connecting the printer to a computer and hence can be used to
check printer function and status. See “Checking for Clogged Nozzles” on page 181.
Refer to the following section for information on what to do if the pattern does not print correctly.
o Is the message Motor Self Adjustment displayed on the control panel's screen?
The printer adjusts the internal motor. Wait for a while without turning off the printer.
o Is Circulating ink... displayed on the screen of the control panel?
The printer is performing auto ink circulation to prevent spot color ink sedimentation in the print head or tube. If Cancel is
displayed on the lower left of the screen, press the W button to cancel ink circulation. However, it cannot be canceled while
ink circulation is required. See “Spot Color Inks” on page 35.
o Perform head cleaning.
The nozzles may be clogged. Print a test pattern again after performing head cleaning.
See “Head Cleaning” on page 183.
o Has the printer been left unused for a long time?
If the printer has not been used for a long time, the nozzles may have dried up and have been clogged. Steps to take when the
printer has not been used for a long time. See “Notes When Not Using the Printer” on page 31.