Filter
Top Products
Using the Control Panel Menu 210
Light Off/1 to 240 hours Choose the frequency with which the printer performs head cleaning for
each level: never (Off) or after 1 to 240 hours. Periodical Cleaning will not
be performed while Off is selected. If a value between 1 and 240 hours is
selected, auto head cleaning will be performed after the specified
number of hours. If printing is in progress or the printer is in sleep mode
when the specified time has elapsed, head cleaning will only be
performed after printing is complete.
The following reset the timer:
When the specified time has been changed.
When All Nozzles has been performed over the lever selected in this
setting.
Medium
Heavy
Power
3
Cleaning Cycle Off Choose the frequency with which the printer performs auto head
cleaning: never (Off) or once every 1 to 10 pages. Cleaning cycle will not
be performed while Off is selected. Select 1 to 10 to perform head
cleaning before the specified number of pages is printed.
1 to 10 pages
Heat Off Timer 15 to 240 minutes You can turn off the heaters automatically when no errors are detected
and no print jobs are in progress. This option is used to choose the
interval before the heaters turn off automatically.
The printer will enter sleep mode when the Heat Off Timer expires. In
sleep mode, the control panel turns off and the internal motors and other
components consume less power. If an additional print drying system is
installed (included with the S50675, optional with other models), it will
turn off automatically.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if
no operations are performed for another 30 seconds under these
conditions. The printer and heaters are only fully reactivated when a
print job is received, the media loading lever is used, or another
operation involving printer hardware is performed.
Head Mode
1
2 Heads Mode Use 2 Heads Mode in most situations.
For example, if there is a clogged nozzle in a single print head and the
clog cannot be cleared after repeated head cleaning, you continue
printing using the unclogged print head. This feature is convenient
because printing can continue during work time and head cleaning and
other maintenance can be done after work.
Check the check pattern printed in the Nozzle Check, and then select
the unclogged head.
Head 1
Head 2
Restore Settings Yes Select Yes to restore all items in the Printer Setup menu to their default
settings.
No
Item Parameter Explanation