Filter
Top Products
Basic Operations 52
While holding the tabs on both sides, move the plates to the edges of the media. Adjust
so that both edges of the media are aligned to the center of the row of round holes in
the plates.
Important:
❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch)
thick. The media holding plates could touch and damage the print head.
❏ Always position the plates so that the edges of the media are at the centers of the round
holes. Incorrect positioning causes banding (horizontal lines, tint unevenness, or
stripes).
❏ Move the media holding plates to the left and right edges of the platen when they are
not in use.
❏ Do not use the media holding plates if the sides of the printed media are smudged or
torn.