Filter
Top Products
Basic Operations 39
Load media just before printing.
The pressure rollers may crease media left in the printer. The media may also become
wavy or curled, causing jams or resulting in the media coming into contact with the print
head.
Observe the following points when handling media:
If the following points are not observed when handling media, small amounts of dust and
lint may stick to the media surface and cause in ink drops in the print results.
❏ Do not place exposed media directly on the floor.
Media should be rewound and inserted in its original packaging for storage.
❏ Do not carry media with the media surface pressed against clothing.
Handle media in its individual packaging until just before loading the media in the
printer.
Do not load media if its right and left edges are uneven.
If the right and left edges of the roll are uneven, media feeding problems may cause the
media to move around during printing. Either rewind to align the edges or use a roll without
any issues.